• Home
  • Sto Systems
    RENDER SYSTEMS

    Concrete Block Construction

    Render Systems for Concrete Block Construction

    Render Brick Construction

    Render Systems for Brick Construction


    EPS Construction

    Render Systems for Polystyrene Block Construction


    AAC Panel Construction

    Solutions for AAC Panel
    Construction


    AFS LOGICWALL Construction

    Solutions for AFS LOGICWALL Construction

    Knauf Permarock Construction

    Solutions for Knauf Permarock Construction


    Cement Sheet
    Construction

    Solutions for Cement Sheet Construction

    Concrete Construction

    Solutions for Concrete Construction


    EasyLap Panel
    Construction

    Solutions for EasyLap Panel Construction

    Exterior Facade Paints

    Paints for Exterior
    Applications

    Sto Finishing Renders

    Coloured Finishing Renders for
    Sto Systems

    StoColor System

    A planning tool to assist in finding a colour for your Sto System

    StoVeneer Wood

    Timber-look mineral veneer boards for facades and feature walls

    StoVentec R

    A rendered ventilated rainscreen system for new builds and refurbishments

    Exterior Render Repair Systems

    Repairs for cracked and leaky substrates

    StoSilent Acoustic Systems

    Seamless acoustic wall and ceiling systems

    StoTherm Insulation System

    Continuous, thermal-bridge-free building envelopes

  • Detail Finder
    Detail Finder

      for

     

    Search Sto
  • About
  • News
  • StoSignature
  • Unitex

StoCalce Fondo: Decorative Plaster Base Coat and Lime Wall Finish

Last updated 17 November 2026

StoCalce Fondo is a decorative plaster base coat and lime-based wall finish for interior walls. It levels the substrate for StoCalce Marmorino and StoCalce Veneziano, and it can also be used on its own for a matt, softly textured wall. Download the technical data sheet or request a quote.

StoCalce Fondo matt lime-based wall finish with black marble grains

What is StoCalce Fondo?

StoCalce Fondo is a mineral decorative filler on a lime base. It is ready to use, matt in appearance and carries fine black marble grains. It belongs to Sto's StoCalce Deco range and was previously sold as StoLook Fondo.

It does two jobs. First, it is the foundation of the system: the decorative plaster base coat that evens out the substrate so that the polished or stone-effect layers above it sit properly. Second, it is a finish in its own right. Applied and worked on the wall, it gives a soft, matt, lime-based wall finish with natural character.

It is formulated without preservatives, is solvent-free and plasticiser-free, and has low emissions. It carries a TÜV seal of quality, is highly vapour permeable, and is free of the substances associated with black dust on interior walls.

A key coat for decorative plaster

The finish you see on a Marmorino or Veneziano wall is only as good as what is under it. StoCalce Fondo is the key coat for decorative plaster in the StoCalce Deco range: it is applied to level the substrate so that the decorative layers above it have an even base. It is also used as the base for further decorative treatments.

Used as the base for StoCalce Marmorino, it prepares the wall for a polished, silk gloss result. Used under StoCalce Veneziano, it is trowelled off to its grain size to form the key coat for the stone-effect layers.

Fondo as a finish in its own right

On its own, StoCalce Fondo can be float-finished into a matt, lightly textured surface. Several techniques are possible: classico, travertino, rustico, antico and oriente, each giving a different surface character. It can also be used as a base for glazing and patina treatments. Detailed instructions for each technique are available from Sto Australia on request.

For architects and designers, this means one product can cover both the preparation and the final look of a feature wall, which keeps the build-up simple.

Colour and tinting

StoCalce Fondo is supplied in natural white. It can be tinted to any shade of the StoColor System using alkali-resistant tinting pastes only. Intense shades can show natural clouding, which is part of the character of a lime-based wall finish, but it is worth testing on site before committing to a strong colour.

Why a lime-based wall finish

Lime has been used on walls for centuries because it works with the building rather than against it. A lime-based wall finish such as StoCalce Fondo is mineral, matt and highly vapour permeable, so the wall stays diffusion-open instead of being sealed behind a film. It is formulated without preservatives, solvents or plasticisers, and it is free of the substances associated with black dust.

For a designer or builder, the practical benefit is a single product family. Fondo, StoCalce Marmorino and StoCalce Veneziano are designed to work together, so the base coat and the decorative layers come from the same source, with one technical point of contact at Sto Australia.

Where StoCalce Fondo is used

StoCalce Fondo is for interior use only, and only on surfaces with low water impact. It is not suitable for wet areas. The substrate should be sound, dry and clean, and an intermediate coat is applied before the Fondo goes on. Never mix material that has begun to harden.

StoCalce Fondo technical data

The main properties of StoCalce Fondo are summarised below. Always check the current technical data sheet before specifying.

StoCalce Fondo technical data
PropertyDetail
Product typeMineral decorative filler on a lime base, ready to use
AppearanceMatt, with black marble grains
Area of applicationInterior walls with low water impact; not for wet areas
ColourNatural white, tintable
ConsumptionAbout 0.8–1.0 kg/m² per cycle
Minimum application temperature+5 °C
Pack size25kg pail
PreservativesFormulated without preservatives

Scroll sideways to see the full table.

How StoCalce Fondo is applied

StoCalce Fondo is applied over the intermediate coat and worked to suit the intended result: trowelled off as a key coat when it is the base for a further layer, or finished by float when it is the final surface. Do not apply it below +5 °C.

Good preparation and experienced hands matter here as much as with any decorative plaster. Sto Australia can connect you with Sto-registered applicators.

Before a full project, ask for a sample board or a mock-up. Whether Fondo is the base for another finish or the final surface, a sample lets the architect, builder and client agree on the technique, colour and level of finish under the real lighting. Sto Australia can support mock-up assistance and plan review.

StoCalce Fondo data sheets and downloads

The technical data sheet, the material safety data sheet and the sustainability data sheet for StoCalce Fondo are available below. Please check that you are working from the current versions before you specify, and contact Sto Australia if you need help finding the right document for your project.

StoCalce Fondo in the Sto interior finishes range

StoCalce Fondo is one of three products in Sto's StoCalce Deco range of lime-based interior finishes, all engineered in Germany by a group whose management systems are ISO 9001 and ISO 14001 certified. Sto's history with lime goes back to 1936. The finishes it prepares the wall for are StoCalce Marmorino and StoCalce Veneziano. For the full picture, see the Sto finishing renders overview.

Specify StoCalce Fondo with Sto Australia

Sto Australia's technical consultants can help you choose a technique, check colour suitability and match StoCalce Fondo to your substrate, with plan review and mock-up assistance available. Tell us about your substrate, wall and preferred colour, and a consultant will respond during business hours, Monday to Friday, 7:00am to 3:30pm. Request a quote or call +61 3 9768 4900.

Frequently asked questions

Is StoCalce Fondo only a base coat?

No. It is the base coat for StoCalce Marmorino and StoCalce Veneziano, but it can also be finished on its own as a matt, lime-based wall finish.

Can StoCalce Fondo be used outside?

No. It is an interior-only product, and it is for surfaces with low water impact only.

Can StoCalce Fondo be tinted?

Yes. It is supplied in natural white and can be tinted using the StoColor System with alkali-resistant tinting pastes. Strong colours can show natural clouding.

Do I need StoCalce Fondo under Marmorino or Veneziano?

StoCalce Fondo is the key coat in the Veneziano system and the levelling base for Marmorino. Check the current technical data sheets for the system you intend to specify.

What techniques can be used with StoCalce Fondo?

Several, including classico, travertino, rustico, antico and oriente. Sto Australia can send detailed instructions on request.