StoCalce Marmorino: Polished Lime Plaster for Interior Walls
Last updated 17 November 2026
StoCalce Marmorino is a polished lime plaster for interior walls, with a smooth, silk gloss surface that has the depth and softness of marble. Engineered in Germany and applied by hand in thin layers, it suits feature walls, reception areas and considered residential and commercial interiors. Download the technical data sheet or request a quote.

What is StoCalce Marmorino?
StoCalce Marmorino is a mineral decorative filler on a lime base, applied in thin layers to give interior walls a smooth, lustrous finish. It belongs to Sto's StoCalce Deco range and was previously sold under the name StoLook Marmorino. If you have come across the name before, it is the same product family.
Marmorino plaster has long been used to create walls that look like polished marble, with soft movement and a gentle sheen rather than the flat look of paint. StoCalce Marmorino brings that tradition to modern projects in a ready-to-use form. It is formulated without preservatives, is solvent-free and plasticiser-free, and has low emissions, which makes it a considered choice for occupied interiors. It also carries a TÜV seal of quality.
Because the plaster is highly vapour permeable, the wall stays diffusion-open instead of being sealed behind a film. It is also free of the substances associated with so-called black dust, the dark deposits that can build up on some interior walls.
A polished, silk gloss, marble-like finish
The defining feature of StoCalce Marmorino is its surface. Each thin layer is compacted with the trowel until the wall takes on a smooth, silk gloss sheen, so the finished plaster reads as polished stone with subtle cloudy variation. That is the difference between a polished plaster and an ordinary painted or textured wall: the light moves across the surface rather than sitting on top of it.
The level of gloss is in the applicator's hands. The more the surface is compacted with the trowel edge, the higher the polish, so a wall can range from a soft satin to a glossy, marble plaster finish. Sto's optional wax can then be polished into the surface with a cloth to add protection and deepen the sheen. A stronger wax can intensify the contrast between light and dark areas for a more dramatic effect.
The same plaster can be worked in other ways too. Beyond the classic smooth technique, Marmorino can be finished in several other decorative effects. Sto Australia can send detailed instructions for each on request.
Colour and tinting
StoCalce Marmorino is supplied in natural white and can be tinted, so a silk gloss wall finish is not limited to white or cream. Tinting is carried out with the StoColor System, and Sto's tinting pastes can be used to build up colour. Pale and mid tones tend to show the soft cloudy movement of the plaster best, while stronger colours give a deeper, more dramatic result.
As with any hand-applied plaster, small variations in tone and sheen are part of the character of the finish. For that reason, we recommend a sample or mock-up on site, under the real lighting, before committing to a colour across a whole project.
Where StoCalce Marmorino is used
StoCalce Marmorino is for interior use only. It is suited to feature walls, entry foyers, reception and hospitality spaces, retail interiors and residential living areas where a refined, tactile wall is part of the design. It is not suitable for wet areas such as shower enclosures.
The substrate matters as much as the plaster. The wall must be sound, dry, clean and level before Marmorino goes on, and a polished finish shows any flaws underneath it. A prepared base coat is part of the system, so surface preparation should be planned from the start of the project, not left to the end.
StoCalce Marmorino technical data
The key properties of StoCalce Marmorino are summarised below. Always check the current technical data sheet before specifying.
| Property | Detail |
|---|---|
| Product type | Mineral decorative filler on a lime base |
| Appearance | Smooth, silk gloss, marble-like |
| Area of application | Interior walls; not for wet areas |
| Colour | Natural white, tintable |
| Consumption | About 0.2 kg/m² per cycle |
| Minimum application temperature | +5 °C |
| Application | By hand, with the StoCalce Marmorino smoothing trowel |
| Pack size | 25kg pail |
| Preservatives | Formulated without preservatives |
Scroll sideways to see the full table.
How StoCalce Marmorino is applied
StoCalce Marmorino is applied by hand, in thin layers, and the build-up is what creates the finish. The first stage is a levelling base coat, worked on in a criss-cross pattern with the smoothing trowel. Once that has dried for at least 12 hours, it is lightly sanded with 180 grit paper and dusted off. Two further finishing layers are then applied and smoothed in turn, leaving about 12 hours between them, and each is compacted with the trowel edge until the desired gloss is reached.
The smoothing trowel is not a detail. Using it prevents the grey discolouration that can come from metal abrasion on a light-coloured polished plaster. After about two weeks of drying, the surface can be waxed and polished with a cloth. Any excess wax can leave a fogged look, which white spirit removes.
The plaster should not be applied below +5 °C. It can cause skin irritation and serious eye damage, so gloves and eye protection should be worn. Because the result depends so heavily on technique, we recommend experienced applicators, and Sto Australia can connect you with Sto-registered applicators.
StoCalce Marmorino data sheets and downloads
The technical data sheet, the material safety data sheet and the sustainability data sheet for StoCalce Marmorino are available below. Please check that you are working from the current versions before you specify, and contact Sto Australia if you need help finding the right document for your project.
StoCalce Marmorino in the Sto interior finishes range
StoCalce Marmorino is one of three products in Sto's StoCalce Deco range of lime-based interior finishes, all engineered in Germany by a group whose management systems are ISO 9001 and ISO 14001 certified. Sto's history with lime goes back to 1936. The range also includes StoCalce Veneziano, a matt stone-effect Venetian plaster, and StoCalce Fondo, the base coat that prepares walls for Marmorino and Veneziano. For the full picture, see the Sto finishing renders overview.
Specify StoCalce Marmorino with Sto Australia
Sto Australia's technical consultants can help you choose a technique, check colour suitability and match StoCalce Marmorino to your substrate, with plan review and mock-up assistance available. Tell us about your substrate, wall and preferred colour, and a consultant will respond during business hours, Monday to Friday, 7:00am to 3:30pm. Request a quote or call +61 3 9768 4900.
Frequently asked questions
Is StoCalce Marmorino suitable for exterior walls?
No. StoCalce Marmorino is an interior-only product. For facades, Sto offers a range of finishing renders, which you can compare on the Sto finishing renders page.
Can StoCalce Marmorino be used in bathrooms?
It can be used in interiors but not in wet areas, so it should not be applied inside shower enclosures or anywhere that is exposed to direct water. Talk to Sto Australia about a bathroom wall that sits outside the wet zone.
Can the colour be matched?
StoCalce Marmorino is supplied in natural white and can be tinted using the StoColor System. We recommend a sample on site first, as the sheen and tone shift with the lighting.
Does it need wax?
Wax is optional. It can be polished into the surface after about two weeks of drying to add protection and deepen the sheen, and a stronger wax can lift the contrast between light and dark areas.
How much does StoCalce Marmorino cover?
Consumption is about 0.2 kg/m² per cycle, and a typical build-up uses a base coat plus two finishing layers. Sto Australia can help you estimate quantities for your project.

