StoCalce Veneziano: Venetian Plaster with a Natural Stone Look
Last updated 17 November 2026
StoCalce Veneziano is a Venetian plaster for interior walls, giving a matt, smooth surface with the depth and character of natural stone. Engineered in Germany and applied by hand, it can be worked into several looks, from classic marble to concrete and travertine. Download the technical data sheet or request a quote.

What is StoCalce Veneziano?
StoCalce Veneziano is a highly decorative, paste-form mineral smoothing filler on a lime base. It is the product to choose when the brief is a wall that looks like stone rather than paint: matt, softly varied, and hard-wearing once cured. It belongs to Sto's StoCalce Deco range and was previously sold as StoLook Veneziano.
The name points to its origins. Venetian plaster is a centuries-old technique of building up a wall in thin, smoothed layers of lime so that the surface develops depth and movement. StoCalce Veneziano delivers that result in a ready-to-use form, with consistent quality from batch to batch.
It is formulated without preservatives, is solvent-free and plasticiser-free, and has low emissions. It carries a TÜV seal of quality, is highly vapour permeable, and is free of the substances associated with black dust on interior walls.
A matt, stone effect plaster in several finishes
Where a polished plaster is glossy, StoCalce Veneziano is matt. It reads as stone effect plaster: a calm, smooth surface with subtle cloudiness and the slightly chalky depth of natural stone. That makes it well suited to walls that need presence without shine.
The finish depends on technique. Four looks are used with StoCalce Veneziano: classico, the traditional Venetian look; rustico, a more rustic surface; a concrete character, for a concrete look plaster suited to contemporary interiors; and travertino, a travertine plaster finish inspired by the natural stone. Detailed instructions for each technique are available from Sto Australia on request.
Colour and tinting
StoCalce Veneziano is supplied in natural white and is tinted with Sto's tinting pastes. Marble-inspired shades are available in the StoCalce range, from warm yellows and reds to green and black, along with a cocciopesto shade, and custom colours can be developed within the StoCalce Deco range. Tinting is done before application, and the layers are then worked to bring out the variation in tone.
Because the colour of a hand-applied stone effect finish depends on the technique and on how much the layers are worked, we recommend a sample on site before committing to a colour.
Why specify StoCalce Veneziano
For designers, the appeal of StoCalce Veneziano is that it gives a bespoke, hand-finished wall from a controlled, ready-to-use product. The finish is hard-wearing once cured, so it suits busy commercial and hospitality interiors as well as homes. Because the plaster is vapour permeable, the wall stays diffusion-open, and because it is formulated without preservatives, solvents or plasticisers, it suits spaces where people spend long periods of time.
It also works as part of a wider scheme. The same range includes a polished option and a base coat, so a project can use more than one finish from a single family of products, with consistent colour and a single technical point of contact at Sto Australia.
Where StoCalce Veneziano is used
StoCalce Veneziano is for interior use only. It suits feature walls, lobbies, hospitality interiors, retail spaces and residential living areas. It is not suitable for wet areas.
The system starts with the substrate. After a suitable preparation coat, StoCalce Fondo is applied first as a key coat, trowelled off to its grain size, and the Veneziano layers go over that. Planning this build-up early prevents surprises on site.
StoCalce Veneziano technical data
The main properties of StoCalce Veneziano are summarised below. Always check the current technical data sheet before specifying.
| Property | Detail |
|---|---|
| Product type | Mineral smoothing filler on a lime base, paste form |
| Appearance | Matt, smooth, stone-like |
| Area of application | Interior walls; not for wet areas |
| Colour | Natural white, tintable |
| Consumption | About 0.8–1.0 kg/m² per cycle |
| Minimum application temperature | +5 °C |
| Application | By hand |
| Pack size | 25kg pail |
| Preservatives | Formulated without preservatives |
Scroll sideways to see the full table.
How StoCalce Veneziano is applied
StoCalce Veneziano is applied by hand. The wall is first prepared, then given a key coat of StoCalce Fondo, and finally two layers of tinted Veneziano are applied and compacted. The Marmorino smoothing trowel is used for compacting the plaster.
Keep the material covered during breaks so that it does not dry out, and do not apply it below +5 °C. Tools can be cleaned with water. As with all hand-applied plasters, the quality of the result depends on the applicator, so we recommend experienced applicators, and Sto Australia can connect you with Sto-registered applicators.
Before a full project, ask for a sample board or a mock-up. A sample lets the architect, builder and client agree on the technique, colour and level of finish under the real lighting, and gives the applicator a clear reference to work to. Sto Australia can support mock-up assistance and plan review.
StoCalce Veneziano data sheets and downloads
The technical data sheet, the material safety data sheet and the sustainability data sheet for StoCalce Veneziano are available below. Please check that you are working from the current versions before you specify, and contact Sto Australia if you need help finding the right document for your project.
StoCalce Veneziano in the Sto interior finishes range
StoCalce Veneziano is one of three products in Sto's StoCalce Deco range of lime-based interior finishes, all engineered in Germany by a group whose management systems are ISO 9001 and ISO 14001 certified. Sto's history with lime goes back to 1936. For a glossier, polished alternative, see StoCalce Marmorino. The base coat that prepares the wall is StoCalce Fondo. For the full picture, see the Sto finishing renders overview.
Specify StoCalce Veneziano with Sto Australia
Sto Australia's technical consultants can help you choose a technique, check colour suitability and match StoCalce Veneziano to your substrate, with plan review and mock-up assistance available. Tell us about your substrate, wall and preferred colour, and a consultant will respond during business hours, Monday to Friday, 7:00am to 3:30pm. Request a quote or call +61 3 9768 4900.
Frequently asked questions
What is the difference between StoCalce Veneziano and StoCalce Marmorino?
StoCalce Veneziano is matt and reads as natural stone, while StoCalce Marmorino is smooth and silk gloss, like polished marble. Both are interior lime plasters from the same range.
Can StoCalce Veneziano give a concrete look?
Yes. One of its techniques produces a concrete character, which suits modern interiors that want the calm of concrete without its weight. Ask Sto Australia for the technique instructions.
Is StoCalce Veneziano suitable for exterior walls?
No. It is an interior-only product. For facades, see the Sto finishing renders on the parent page.
Does StoCalce Veneziano need a base coat?
Yes. StoCalce Fondo is applied as a key coat before the Veneziano layers, so the build-up starts with a prepared wall.
Can StoCalce Veneziano be tinted?
Yes. It is supplied in natural white and tinted before application, with marble-inspired shades and custom colours available within the StoCalce Deco range.

